Specifications

Case Size: Width: 12.125 in. Length: 14.875 in. Height: 7.25 in. excluding cables

Wt. DT1530 & DT2030: about 15 lb., DT3050 & DT5050: about 23 lb.

Color: Safety Yellow

Environmental:

Light weight structural resin enclosure with water resistant front panel. Lexan® panel overlay over aluminum sub-panel. Ergonomic handle.

Electrical:

• 120 VAC Input for the DT2030, 125/250 VAC Input for the DT5050
• Power required – 4 Watts nominal
• Circuit breaker protected:
  • DT1530: 15 Amp and 30 Amp breakers
  • DT2030: 20 Amp and 30 Amp breakers
  • DT3050: 2 30 Amp breakers on the 125V side, 3 50 Amp breakers on the 250V side
  • DT5050: 2 50 Amp breakers on the 125V side, 3 50 Amp breakers on the 250V side
• AC connector sets provided:
  • DT1530: 125 VAC straight blade 15 Amp and 125 VAC 3 wire locking 30 Amp
  • DT2030: 125 VAC 3 wire locking 20 Amp and 125 VAC 3 wire locking 30 Amp
  • DT3050: 125 VAC 3 wire locking 30 Amp 125V and 125/250 VAC 4 wire locking 50 Amp
  • DT5050: 125 VAC 3 wire locking 50 Amp 125V and 125/250 VAC 4 wire locking 50 Amp. The DT5050 may be used for testing 15A 125V,20A 125V, or 30A 125V by using the appropriate adapters (not included).
• Silver/Silver-Chloride half cell probe used for in-water measurements (optional, sold separately)

Standard Configuration:

Electrical Integrity Test meter with specified AC connectors, one male and one female connector for each amperage. The probe is not included with the DockTester™ units but is available separately.

One Year Warranty on all DockTester™ Electrical Integrity Testers